- WE-9159-5
- Four infeeding & four outfeeding, 5 color 3-side printing.
- The Servo-motor index to serve either single or double infeeding is controlled by human / computer interface control, and gives less electricity consuming.
- The rotating device & ball sucking device are with cushion cylinders can reduce noise and prolong the machines life.
- The "Anti Static" & "Dust off" devices are used.
- Hot air device speeds up the drying time and gives the prefect printing.
- The extra light mounted on the machine gives clear printing.
- With large plastic feeder and well protection gives no scratch happen between balls when feeding.
- The special compressed air storage distributes air flow equally, no less or over flow air situation.
- The fixtures are with injected rubber can hold the ball stably, no slippery, and easy to be replaced.
- WE-9159-12
- This machine can print 2 balls with 6 sides and 4 balls with 4 sides.
Manually pour the material into the storage tank → automatically climb the golf balls to prepare the material → the robot automatically sucks 4 balls into the material → shifts 4 balls to print → UV dry the first side → servo rotates 90° to the second side → print → UV dry the second side → Then rotate 3-4 sides to print to the outlet, the fixture is opened → the three-stage robot sends the ball to the second round turntable → 4 balls are moved each time → DD motor drives → servo motor rotates the required UV drying surface → UV drying is completed → the robot sucks out the material.
When 2 balls for 6 sides printing and UV drying are selected, the ball displacement is 1 station 2 balls each time, and two sets of top and bottom flipping mechanisms are started at the same time → 6-side printing and UV drying are performed.
If UV drying is not used, four-in-four-out traditional ink printing can be used → four sets of simple ovens can be used to dry and discharge the materials.
- WE-9159-14
- This machine can print 8 modes
| modes | 1st side | 2nd side | 3rd side | 4th side | bottom | top | colors |
| A | 3 | 2 | 3 | 2 | 2 | 2 | 14 |
| B | 3 | 2 | 3 | 2 | 1 | 1 | 12 |
| C | 2 | 2 | 2 | 2 | 2 | 2 | 12 |
| D | 2 | 2 | 2 | 2 | 1 | 1 | 10 |
| E | 3 | 3 | 3 | 3 | 12 | ||
| F | 2 | 2 | 2 | 2 | 8 | ||
| G | 1 | 1 | 1 | 1 | 1 | 1 | 6 |
| H | 1 | 1 | 1 | 1 | 4 |
The above-mentioned printing modes are completed with UV drying or thermosetting ink drying, and the servo rotating mechanism is installed with appropriate displacement according to the printing mode.
Specifications:
| Model | WE-9159-5 | WE-9159-12 | WE-9159-14 |
| Color | 5color (4 at a time) | 6color(4 at a time) 12color(2 at a time) |
14color(2 at a time) |
| Ink supply | Ink cup∮90 | Ink cup ∮130mm | Ink cup∮130mm |
| Control panel | HMI touch panel | ||
| Steel plate size | 120*220*10 | 165*365*12 | 165*365*12 |
| Max print area | ∮35 | ∮35 | ∮35 |
| Pad front-rear stroke | 200 | 200 | 200 |
| Pad up-down stroke | 80 | 125 | 125 |
| Slide table stroke | − | − | − |
| Positioning accuracy | (+/-0.02) | ||
| Working table size | − | − | − |
| Working table up-down | − | − | − |
| Rotary stations | 8 | 24 | 30 |
| Hot air dryer | Hot air + oven | Hot air+UV light | Hot air+UV light |
| Ink removal device | − | − | − |
| Output/Hr | 6,000 ~ 6,600 | 1,200 ~ 1,500 | 1,200 ~ 1,500 |
| power d(choose one) (5A for hot air device) |
3Phase 220V 30A 50~60Hz | 3Phase 220V 75A 50~61Hz | 3phase 220V 75A 50~62Hz |
| Air pressure (kg/cm2) | 6 | ||
| Pad pressurize kgf | 186 | 75 | 48 |
| Air consumption (L/Min) | 110 | 9 | 7 |
| Dimension L*W*H (mm) | 2,370 x 2,780x 2,200 | 750 x 420 x 820 | 540 x 420 x 750 |
| Net WT(kg) | 2200 | 4000 | 4000 |