1Action mode selection: automatic/semi-automatic/inch
2 Start mode: panel/foot switch
3 Scraper pressure control: constant pressure type with pressure regulating valve
4 Work surface size: 700×1100mm
5 Maximum printing area: 600×900mm
6 Minimum printing area: 460×300(㎜)
7 Lifting stroke: 300mm
8 Left and right stroke: 1100mm
9 Air pressure requirement: 5-7 Bar
10 Power supply: 220V 60Hz three-phase
11 Screen printer size: 1270×1500×1680mm
12 Plate feeder size: 1400×900×900mm
1 Vertical structure, PLC human-machine interface control, touch-screen setting of machine operating parameters.
2 Servo lifting and servo printing design, fast and stable, accurate positioning.
3 Lifting and sliding use square rails to ensure accurate printing.
4 Multiple printing operation modes, adjustable speed, fast operation, stable and smooth operation, accurate positioning.
5 Square rail printing scraper makes the printing ink layer more uniform.
6 The printing stroke and the thickness of the printed workpiece are set on the touch screen, and the workbench has a fine-tuning self-locking function for easy adjustment.
7 The lifting and lowering ultra-long stroke design is convenient for picking up and placing workpieces.
8 It has inch, single and automatic functions, and is easy to switch.
9 Multiple emergency safety devices. Ensure the safety of operators during the printing process.
B Printing mode:
1 This machine is a multifunctional model and can be divided into semi-automatic printing mode and automatic printing mode:
Semi-automatic mode: for proofing or small-scale printing, manual loading → automatic initial positioning → transfer feeding → precise positioning → descending printing → automatic discharge.
Fully automatic mode: manual loading → automatic initial positioning → transfer feeding → precise positioning → descending printing → automatic discharge.
C Positioning method:
1 The whole machine consists of a feeding section and a printing section, and the printed material is moved by a belt conveyor. The working concept is: the incoming material is fed manually, and the conveyor belt is used on the table of the feeding section for initial positioning (6 positioning pins), and then transferred to the printing table for precise positioning (8 positioning pins), and then printing is started. After printing is completed, the material is manually taken back.
2 Positioning method 8 synchronous operation and 6 synchronous operation mode positioning and release.