Semi-auto screen printer with sliding table(WE-125LR)

Home - Showroom - Screen Printer-NormalScreen

Semi-auto screen printer with sliding table

Product ID: WE-125LR

Specifications:

1. Application: Printing on non-woven fabric. Use platern adhesives to stick the fabric on the bakeliet or
aluminum alloy plate for easy loading/unloading & printing. For quickly feeding, please prepare
more printing base plate.
2. Power：380V 3 phase 50HZ 30A
3. Working table ：1260×1550(㎜)
4. Max. printing area：1000×1250(㎜)
5. Min. printing area：550×650(㎜)
6. Max. screen frame：1650×1750(㎜)
7. Min. screen frame：1200×1200(㎜)
8. Printing thickness：0~12㎜
9. Printing speed：500~600P/H
10. Machine dimension：L2925×W2695×H1530(㎜)
11. Machine weight：1650KG

Features:

1. Patented squeegee constant pressure device printing pressure left and right can be adjusted individually,
printing film thickness is accurate.
2. Pneumatic components are adopted from German FESTO factory ISO specification products,
convenient for maintenance and replacement.
3. scraper and screen frame peeling system both use servo motor moving is stable and accurate。
4. The printing table surface is hardened by grinding, with high flatness.
5. Four columns rise / fall synchronous action, accurate positioning
6. The table is positioned by electromagnet, with precise positioning。
7. Double blower design, suction and blowing wind multi-stage adjustment.
8. The digital setting of the printing stroke is adopted for the operator to set up the plate.
9. Squeegee and flood coater blade can be used separately for switching
10. Three screen frame peel off methods, delayed peel off, half peel off and full peel off
11. Adjustment of the printing table X, Y1, Y2 three-way without gap
12. The screen frame can be lifted up 380mm to facilitate the operator to wash the plate.
13. Touch operation panel, automatic fault detection and troubleshooting mode display
14. Four columns to prevent the instantaneous fall device, to ensure the safety of personnel.
15. Squeegee pressure: 0～6 kg/cm² With squeegee air pressure stabilization device.
16. Printing base moving motor: servo motor, no jitter during printing
17. Printing start position setting: Digital setting on the touch panel
18. Flood coater blade start position: Digital setting on the touch panel
19. Squeegee height adjustmen: Max. 45mm
20. Squeegee angle adjustment: 60~90˚
21. Flood coater blade height adjustmen: Max. 45mm
22. Flood coater blade adjustment :60~90˚
23. Screen frame peel off method: Delayed peel off, half peel off and full peel off
24. Screen frame peel off drive: Servo motor+speed reducer
25. Printing base drive: Servo motor(same of the squeegee drive/flood coater balde drive)
26. Repeat Printing Count: Min：1 time Max：9 times
27. Flood coater method: Immediate ink return (ink return immediately after printing) / delayed ink return
(ink return before the next printing starts)
28. Printing base t two-stage uplift: Printing base uplift / squeegee& Flood coater blade uplift.
29. Frame peel off height: 0~20mm
30. Frame peel off speed: synchronized with the printing seat speed
31. Screen frame and printing table gap 0~18mm(0 gap the screen frame must more than 1700mm)
32. Pause after printing:Pause for a set period of time before printing, settable from 0 to 20 seconds
33. POD & PLC system is adopted for easy operation and setting.